TECHNICAL DATA.

Select model

Weight

Unladen weight EU in kg 1,795
Max. permissible weight in kg 2,380
Permitted load in kg 660
Permitted axle load front/rear in kg 1,110/1,380
Luggage capacity min. (seats up or roof down) in l 610
Luggage capacity max. (seats down or roof up) in l 1,800
Trailer load (unbraked) in kg 750
Trailer load 8% (braked) in kg -
Trailer load 12% (braked) in kg 2,100

Engine

Cylinders/valves 4/4
Capacity in ccm 1,998
Stroke/bore in mm 94.6/82.0
Engine power in kW (PS) at 1/min 190 (258)/5,000-6,500
Engine torque (Nm) at 1/min 400/1,550-4,400
Compression ratio : 1 10.2

Performance

Top speed in km/h 250
Acceleration 0–100 km/h in s 6.3

Fuel consumption

Urban in l/100 km 8.5
Extra-urban in l/100 km 6.5
Combined in l/100 km 7.2
CO2 combined emissions in g/km 165
Tank capacity, approx. in l 68

Wheels

Tyre dimensions front 225/60 R17 99Y
Tyre dimensions rear 225/60 R17 99Y
Wheel dimensions and material front 8,5 J x 20 inches, light-alloy
Wheel dimensions and material rear 10 J x 20 inches, light-alloy

Information about the data.

  • Values outside brackets refer to the basic model with the standard transmission; values in brackets to the model with the optionally-available transmission.

    The values of fuel consumptions, CO2 emissions and energy consumptions shown were determined according to the European Regulation (EC) 715/2007 in the version applicable at the time of type approval. The figures refer to a vehicle with basic configuration in Germany and the range shown considers optional equipment and the different size of wheels and tires available on the selected model.

    (1) The values are applicable until 15.04.2018. Please check availability with your BMW dealer.

    The values of the vehicles labeled with (3), are already based on the new WLTP regulation and are translated back into NEDC-equivalent values in order to ensure the comparison between the vehicles. [With respect to these vehicles, for vehicle related taxes or other duties based (at least inter alia) on CO2-emissions the CO2 values may differ to the values stated here.]

    The CO2 efficiency specifications are determined according to Directive 1999/94/EC and the European Regulation in its current version applicable. The values shown are based on the fuel consumption, CO2 values and energy consumptions according to the NEDC cycle for the classification.

    For further information about the official fuel consumption and the specific CO2 emission of new passenger cars can be taken out of the „handbook of fuel consumption, the CO2 emission and power consumption of new passenger cars“, which is available at all selling points and at https://www.dat.de/angebote/verlagsprodukte/leitfaden-kraftstoffverbrauch.html.